抗氧剂1010对动态硫化EPDM/PP性能的影响.pdf
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 抗氧剂 1010 动态 硫化 EPDM PP 性能 影响
- 资源描述:
-
塑料工业
第44卷第12期
114
CHINA PLASTICS INDUSTRY
2016年12月
抗氧剂1010对动态硫化EPDM/PP性能的影响
石敏
贵州省材料产业技术研究院,贵州贵阳550014)
摘要:研究了抗氧剂四[B-(3,5-二叔丁基-4-羟基苯基)丙酸]季戊四醇酯(1010)的加入对动态硫化三元
乙丙橡胶(EPDM)/聚丙烯(PP)热塑性弹性体性能的影响。采用抽提法测试了EPDM/PP热塑性弹性体凝胶含量,
通过热空气老化实验研究了抗氧剂1010对EPDM/PP拉伸性能老化保持率的影响,并通过对热油溶胀率的测试研究了
EPDM/PP热塑性弹性体的耐热油性能。研究结果表明:抗氧剂的加入使 EPDM/PP热塑性弹性体凝胶含量降低,力学
性能下降,耐油溶胀率增加,耐热油性能降低,拉伸强度和断裂伸长率的老化保持率升高,耐热氧老化性能提高,当
抗氧剂用量为0.9份时,EPDM/PP拉伸强度和断裂伸长率的老化保持率分别可达95%和88%。
关键词:抗氧剂1010;三元乙丙橡胶;聚丙烯;热塑性弹性体;热氧老化;力学性能
doi:10.3969/j.issn.1005-5770.2016.12.027
中图分类号:TQ334.2
文献标识码:A
文章编号:1005-5770(2016)12-0114-04
Effect of Antioxidant 1010 on Properties of EPDM/PP Dynamically Vulcanized
Thermoplastic Elastomer
SHI Mi
(Guizhou Material Industrial Technology Institute, Guiyang 550014, China)
Abstract The influence of the adding antioxidant pentaerythritol tetrakys [8-3-(3, 5-ditert-butyl-4
hydroxyphenyl)] propionate (antioxidant 1010) on the properties of ethylene-propylene-diene monomer
(EPDM rubber/polypropylene (PP) dynamically vulcanized thermoplastic elastomer(TP).The gel
content was tested by extraction method. The effect of antioxidant 1010 on the thermo-oxidative aged tensile
strength retention of EPDM/PP was studied by hot air aging test. The thermal oil resistance of EPDM/PP was
tested by the test method of hot oil swelling ratio. Results show that with the adding of antioxidant 1010, the
gel content, mechanical properties and thermal oil resistance reduce, the oil swell rate increases, the aged
tensile strength and elongation at break retention and the thermo-oxidative aging resistance increase. Th
aging retention of tensile strength and elongation at break achieve 95%0, 88% with 0.9 phr antioxidant 1010
addition, respectively
Keywords: Antioxidant 1010; Ethylene-propylene-diene Monomer; Polypropylene; Thermoplastic
Elastomer; Thermal Aging; Mechanical Properties
三元乙丙橡胶/聚丙烯热塑性弹性体(EPDM/PP泛应用23。EPDM氧化老化主要影响的是侧基,对
TPV)材料是由EPDM和PP作为基质材料,加入交分子主链稳定性的影响小,同时经过硫化以后,结构
联剂和各种助剂,在高速剪切熔融共混过程中EPDM稳定,耐热性能有一定的提高,但是在热空气条件下
被“就地”硫化而形成的共混物,在共混硫化过程PP分子链段上叔碳氢原子易与空气中的氧反应,使
中,橡胶被剪切破碎分散于PP基质中,由于其独特性能急剧下降,在一些高温环境中使用的部件,需要
的相态结构,使得EPDM/PP兼具有橡胶和塑料的特添加一定的抗氧剂,以提高EPDM/PP材料的抗热氧
性。由于其弹性好、重复利用率高、耐化学腐蚀老化性能。本文通过在 EPDM/PP中添加抗氧剂1010
性及电绝缘性良好等优点被广泛应用于电线电缆、建(四[B-(3,5-二叔丁基ー4-羟基苯基)丙酸]季戊
筑工业以及机械制造等领域,尤其是在汽车行业被广四醇酯),研究了抗氧剂1010对EPDM/PP凝胶含
*贵州省科学技术基金(黔科合J字[2015]2079号)
作者简介:石敏,女,助理研究员,主要从事聚合物材料改性研究。 shimin200@163,com
展开阅读全文
文档分享网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



链接地址:https://www.wdfxw.net/doc33563357.htm