ANSIAWWA C210-2007 钢质输水管道内外壁用液体环氧涂料体系.pdf

ANSIAWWA C210-07
八
(Revision Of ANSI/AWWA C210-03
American Water Works
Association
The Authoritative Resource on Safe Water
AWWA Standard
Liquid-e
Coatin
Systems for the Interior
Id Exte
of Steel
Water P
Ip
e lnes
八
STANDARD
ince 1881
Effective date: May 1, 2008
First edition approved by AWWA Board of Directors May 18, 1978
This edition approved June 24, 2007
Approved by American National Standards Institute Jan. 14, 2008
566 West Quincy Avenue
Denver, CO 80235-3098
Communications
800.926.7337
Conferences
www.awwa.org
Education and Training
Science and Technol
Provided by IHS under licer
nout icense from Hs Copyright O 2008 American Water W Nt r Resale Ciation. All Rights Reserved
AWWA Standard
This document is an American Water Works Association(AWWA)standard. t is not a specification AWWA standards describe mini-
mum requirements and do not contain all of the engineering and administrative information normally contained in specifications
The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is
specified by the user, the product or service is not fully defined AWWA publication of a standard does not constitute endorse
ment of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely
voluntary. This standard does not supersede or take precedence over or displace any applicable aw, regulation, or codes of any
governmental authority. AWWA standards are intended to represent a consensus of the water supply industry that the product de-
scribed will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed
on the first page of the classified advertising section of Journal AWWA. The action becomes effective on the first day of the month
following the month of Journal AWWA publication of the official notice
American National Standard
An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American
National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an
American National Standard does not in any respect preclude anyone, whether that person has approved the standard or not, from
manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American
National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made
in conformity with an American National Standard are encouraged to state on their own responsibility in advertising and promo
tional materials or on tags or labels that the goods are produced in conformity with particular American National Standards
CAUTION NOTICE: The American National Standards Institute (ANS)approval date on the front cover of this standard indicates comple-
tion of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures
require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication
Purchasers of