质量流量计说明书.pdf

BAO59D/O6/en/10.03
50098470
Proline promass 83
Valid as of software version
Coriolis Mass Flow
V 1.06.XX(amplifier)
V 1.03. XX(communication)
Measuring System
Operating Instructions
Endress+ Hauser?I
The Power of Know How
Brief operating Instructions
Proline Promass 83
Brief operating instructions
These brief operating instructions show you how to configure your measuring devic
quickly and easily
Safety instructions
Page 7
Installation
Pade 13
Display and operating elements
Page 35
Commissioning WITHQUICK SETUP
Pade 60 ff
You can commission your measuring device quickly and easily, using the special
Quick Setup menu. It enables you to configure important basic functions using
the local display, for example display language, measured variables, units of
measures, type of signal, etc
he following adjustments can be made separately as necessary
t adiustment
Density adjustment
Application specific QUICK SETUPS
Page 62 ff
In Quick Setup mode you have the option of launching other, applicati
specific Quick Setups, for instance the menu for measuring pulsating flow, etc
Customer specific configuration
age 40 ff
Complex measuring operations necessitate additional functions that you can
configure as necessary with the aid of the function matrix, and customise to suit
your process parameters
self in th
Description of Device Functions "manual, which is a separate part of these
Operating Instructions
Always start trouble-shooting with the checklist on Page 89, if faults occur after
commissioning or during operation. The routine takes you directly to the cause of the
problem and the appropriate remedial measures
Endress+ Hauser
Proline Promass 83
QUICK SETUP Commissioning
QUICK SETUP Commissioning
Note
More detailed information on running Quick Setup menus, especially for devices without
a local display, can be found on Page 60 ff
HOME-POSITION
Selection system units
Mass flow
Volume flow Corr. Vol flow
Temperature
Quit
Mass flow
Volume flow
Corr. Vol flow
emperature
Totalizer
Totalize
calculation
Density
Calculated
4Gの
Exp. Coeff. Lin
6463
Fix Density Exp Coeff. SOR
Reference temp.
Configure another system unit
No1
③ Selection output type
Current output n
Freq/Pulse output n
420
Current outp
Pulse out
Current spa
End value freq
Pulse value
4
Value 0/4 MA
Value F Low
Pulse width
420
422
Value 20 MA
Value F High
Meas. mode
Meas. mo
Meas, mode
Output signal
Time con:
Output signal
Failsafe mode
Failsafe mode
Time constant
Fa
Configure another output
No
Automatic configuration of display
Automatic parameterization of the display」ら
Carrying out another Quick
Batching
Pulsating flow
Gas measurement
Carrying out the selected Quick Setup
Information on the points numbered in the Quick Setup can be found on the following
page
Endress+ Hauser