ASME 美国机械工程师协会标准目录.doc

ASME ??????е?????Э??????(?)
ASME PCC-1?Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ASME B107.52M?Nail-Puller Bars: Safety Requirements
ASME B30.6 INTERPRETATIONS?Interpretations to B30.6-1995 Derricks
ASME B30.17A?Addenda to B30.17-1998 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)
ASME B40.200?Thermometers, Direct Reading and Remote Reading Incorporating ASME B40.3, B40.4, and B40.9; Replaces ASME B40.3:1997
ASME B18.8.100M?Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins Metric Series; Incorporating ASME B18.8.3M, B18.8.4M, B18.8.5M, and B18.8.9M
ASME B56.1 INTERPRETATIONS?Interpretations to B56.1-1993 Safety Standard for Low Lift and High Lift Trucks
ASME AG-1A?Addenda to ASME AG-1-1997 Code on Nuclear Air and Gas Treatment
ASME B30.1A?Addenda to B30.1-1998 Jacks
ASME PVHO-1B?Addenda to Asme PVHO-1-1997 Safety Standard for Pressure Vessels for Human Occupancy
ASME B30.14C?Addenda to B30.14-1996 Side Boom Tractors
ASME B94.18?Punches - Basic Ball-Lock, Light and Heavy Duty R(2000)
ASME NQA-1 INTERPRETATIONS?Interpretations to NQA-1-2000 Edition Quality Assurance Requirements for Nuclear Facility Applications
ASME A112.6.2?Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks
ASME PTC 10?Performance Test Code on Compressors and Exhausters (Performance Test Codes)
ASME B18.30.1M?Open-End Blind Rivets with Break Mandrels (Metric Series)
ASME B18.13A?Addenda to B18.13-1996 Screw and Washer Assemblies - Sems (Inch Series)
ASME B107.51?Star Drills: Safety Requirements
ASME B30.6C?Addenda to B30.6-1995 Derricks
ASME B30.14B?Addenda to B30.14-1996 Side Boom Tractors
ASME BPEA?Addenda to BPE-1997 Bioprocessing Equipment
ASME 3977-1?Gas Turbines: Procurement Part 1: General Introdustion and Definitions ISO 3977-1:1997
ASME 3977-2?Gas Turbines: Procurement Part 2: Standard Reference Conditions and Ratings ISO 3977-2: 1997
ASME AS-11?Personnel of Codes, Standards, and Related Conformity Assessment Committees
ASME B15.1 INTERPRETATION?Interpretations to B15.1-2000 Safety Standard for Mechanical Power Transmission Apparatus
ASME B18.2.2?Square and Hex Nuts (Inch Series) R(1999)
ASME B18.2.3.8M?Metric Hex Lag Screws R(1999)
ASME B18.2.3.8M?
ASME B18.18.1M?Inspection and Quality Assurance for General Purpose Fasteners R(1999)
ASME B18.18.2M?Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners R(1999)
ASME B18.18.3M?Inspection and Quality Assurance for Special Purpose Fasteners R(1999)
ASME B18.18.4M?Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications R(1999)
ASME B18.22M?Metric Plain Washers R(2000)
ASME B27.6?General Purpose Uniform Cross Section Spiral Retaining Rings R(1999)
ASME B27.7?General Purpose Tapered and Reduced Cross Section Retaining Rings R(1999)
ASME B30.19?Cableways
ASME B31.1B?Addenda to B31.1-1998 Edition Power Piping
ASME B56.5?Safety Standard for Guided Industrial Vehicles and Automated Functions of Manned Industrial Vehicles R(2000)
ASME B56.8?Safety Standard for Personnel and Burden Carriers R(2000)
ASME B56.9?Safety Standard for Operator Controlled Industrial Tow Tractors R(2000)
ASME B56.11.1?Double Race or Bi-Level Swivel and Rigid