GBT 3280-1992 不锈钢冷轧钢板(英文版).pdf

UDC669.14.018.821-4
H46
National Standard of the People' s Republic of China
GB/T3280-92
Cold rolled stainless steel sheets and plates
Issued on 1992-11-16
Effected on 1993-06-01
Issued by National Administration of Technical Supervision
National Standard of the People's Republic of China
GBfT3280-92
Cold rolled stainless steel sheets and plates
Superseding GB 709-65
1 The topic contents and scope of application
This standard stipulated the dimensions, shape, technical requirements, test method, regulation for check,
package, mark and quality certificate etc for the cold rolled stainless steel sheets and platos
This standard is applied to the general purpose and corrosion resistant cold rolled stainless steel sheets and
2 Sources of standards
GB 222 Sampling for chemical analysis of steel and the chemical composition tolerance of products.
GB 226 Low multiply magnify structure of steel and the acid dipping testing method for defects
GB 228 Tensile testing method for metak
GB 230 Rockwell hardness test method for metal
GB 23| Brinell hardness test method for mctal
GB 232 Bend test method for metal
GB 247 General stipulation on acceptance check, package, mark and quality certificate for steel
plates and sheets
GB 708 Dimensions, shape, weight and tolerance of the cold rolled steel plates and sheets
GB 2975 Sampling specified for the test of steel mechanics of materials and processing property
GB 4334.1 10% oxalic acid etching testing method for stainless steel
GB 4334.2 Sulfuric-acid/ ferric-sulfate corrosion test method for stainless steel
GB 4334.3 65% nitric acid corrosion testmethod for stainless steel
GB 4334.4 Nitric-acid/ iluohydric-acid corrosion test method for stainless stee
GB.5 Sulfuric-acid/copper-sulfatc corrosion test method for stainless steel
GB 43346 5% sulfuric-acid corrosion test method for stainless steel
GB 4340 Vickers hardness test method for metal
GB 6397 Tensile testing sample of metal
GB 10125 Corrosion test in artificial ambiance salt spray test(SS test)
3 Dimension, shape
3.1 Steel plate dimension and its tolerance should meet the stipulation of GB 708
3.2 The plainness of steel plate should not exceed 10 mm. For the steel plate under cold hardening
condition, its plainness per meter should mect the stipulation of table 1
Authorized by National Administration of
Technical Supervision on 1992-11-16
Effected on 1993-06-01
标准分享ww.mzfw.com免费下教