NACE No.12 金属热喷涂.pdf

NAGE
meri can Welding Societ
INTERNATIONAL
SSPC
THE CORROSON SOCIETY
the society for protective coatings
Item No, 21100
Joint Standare
NACE No 12/AWS C223 M/SSPC-CS 23.00
Specification for the Application of Thermal Spray
Coatings(Metallizing)of Aluminum, Zinc, and
Their Alloys and Composites for the Corrosion
Protection of Steel
T his NACE International (NACE)American Welding Society(AWVSSSPC: The Society for Protective
Coatings standard represents a consensus of those individual members who have reviewed this document
its scope, and provisions. It is intended to aid the manufacturer, the consumer, and the general public. Its
acceptance does not in any respect preclude anyone, whether he has adopted the standard or not, from
manufacturing, marketing, purchasing, or using products, processes, or procedures not addressed in this
standard. Nothing contained in this NACE/AWS/SSPC standard is to be construed as granting any right,
implication or otherwise, to manufacture, sell, or use in connection with any method, apparatus, or product
covered by Letters Patent, or as indemnifying or protecting anyone against liability for infringement of Letters
Patent. This standard represents current technology and should in no way be interpreted as a restriction on
the use of better procedures or materials. Neither is this standard intended to apply in all cases relating to
the subject. Unpredictable circumstances may negate the usefulness of this standard in specific instances
NACE, AWS, and SSPC assume no responsibility for the interpretation or use of this standard by other
parties and accept responsibility for only those official interpretations issued by NACE, AWS, or SSPC in
accordance with their governing procedures and policies which preclude the issuance of interpretations b
individual volunteers
Users of this NACE/AWS/SSPC standard are responsible for reviewing appropriate health, safety,
environmental, and regulatory documents and for determining their applicability in relation to this standard
prior to its use. This NACE/AWS/SSPC standard may not necessarily address all potential health and safety
problems or environmental hazards associated with the use of materials, equipment, and/or operations
detailed or referred to within this standard. Users of this NACE/AWS/SSPC standard are also responsible
for establishing appropriate health, safety, and environmental protection practices, in consultation with
appropriate regulatory authorities if necessary, to achieve compliance with any existing applicable regulatory
requirements prior to the use of this standard
CAUTIONARY NOTICE: NACE/AWS/SSPC standards are subject to periodic review, and may be revised
or withdrawn at any time without prior notice. The user is cautioned to obtain the latest edition. NACE
AWS, and SSP require that action be taken to reaffirm, revise, or withdraw this standard no later than five
years from the date of initial publication
Approved July 2003
ISBN0-87171-713-1
@2003, NACE International, American Welding Society, and SSPC: The Society for Protective Coating
An American National Standard
proved March 2003
NACE International
American Welding Society
SSPC: The Society fol
1440 South Creek Driv
550 NW Lejeune Road
Protectiv