基于颜色识别的食堂结算系统的设计.pdf
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 基于 颜色 识别 食堂 结算 系统 设计
- 资源描述:
-
2076.23
设计与研发
基于颜色识别的食堂结算系统的设计
赵琳,张红,王雅君
(天津天狮学院,天津,301700)
摘要:本文完成了基于颜色识别的食堂结算系统的设计,在食堂购餐时能通过识别餐的颜色实现智能化自助结算。该系统
由微控制器模块、红外检测模块、颜色识别模块、显示模块、系统电源模块构成。当餐盘放入结算区域时,红外检测传感器向微
处理器发出启动信号,系统通过识别餐的颜色来统计不同菜品的种类和数星,然后根据对应的单价计算用餐者应支付的总
价,并通过液品屏显示出来,从而完成自助结算。该系统通过了自助结算测试,对实现食堂现代化、科学化管理具有一定的参考
价值。
关键词:颜色识别;颜色传感器:数据采集:特征识
Design of the Payment System in Canteen Based on Color dentification
Zhao I in, llao Zhanghong, Wang Yajun
(Tian,jin Tianshi College, Tian jin, 301700)
Abstract: This paper has compi eled the design of the payment sysl em in canteen based on coloi
identification, which can rcalizc intelligent seif service scttlcmcnt by identifying the color of the plate
when purchasing meal in the canteen. The system consists o[ micro controller module, infrared detection
modul c, color rccognition modul c, disp I ay modic, system powcr modies. When the plates arc placed into the
settlement area, the infrared sensors send starting signal to the microprocessor, then the system complete
bu[ret setllement by count ing the amount and type of different dishes, cal culating the Lotal price according
to the corresponding unit price that should be paid by the diner, showing the total price through the LCD
display. The system through the buffel setllement Lest, which has certain reference value [or realizing the
modernization of the canteen and scientific managcment
Keywords: color recognition; color sensor; data acquisition: feature recognition
随着高校、企事业单位等规模的不断发展,引入高科技手段菜品的总份数、需支付的总价;系统电源模块主要为系统各模块
进行食堂管理,是解决用餐高峰期购餐拥挤的有效手段。通过调提供合适的工作电压
研现有食堂结算方式存在的弊端,木文提出一种基于颜色识别的
食堂结算系统,该系统可根据餐盘颜色实现智能结算,对于实现
2系统硬件电路设计
食堂现代化、科学化管理具有一定的参考价值。
2.1微控制器模块设计
1系统总体框架设计
STC89C52
基于颜色识别的食堂结算系统框图如图1所示,系统主要由
AT89S52
微控制器模块、红外检測模块、颜色识别模块、显示模块、系统电
P10
Po1/38
源模块几部分构成。其中,微控制器模块根据红外检测模块和颜
P02
P03
色识别模块的输出结果,结合数据库进行智能、自助结算,并将结
算明细送给显示模块,方便消费者核实;红外检测模块主要负责
检測结算区域是否有餐盘存在,从而触发自助结算系统工作;:颜
色识别模块主要判别不同餐的颜色,为系统结算提供依据;显
P32/INTO
P33/INT1
PSEN
示模块主要完成信息的显示,显示内容为菜品名、菜品单价、购买
P34/T0
P2728
P35/T1
P26
P25
颜位识别模块
P244
P23
22P21
RESET
P20
红外检测模块
微控制器模块
示模块
P31/XD P37/RD
系统电源模块
图1系统框图
图2微控制器模块电路图
科研项目:本论文是校级精品课程建设项目(JP20150003单片机原理及应用)阶段性研究成果
甲壬测i
另另数瑶
展开阅读全文
文档分享网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



链接地址:https://www.wdfxw.net/doc60782768.htm