AS 1397-2001 钢板和带钢热浸锌涂层和Al Zn涂层.pdf

AS13972001
∽=9
Australian Standard
Steel sheet and strip-hot-dip zinc.
coated or aluminium/zinc-coated
a?50>2u20zTou=b2u2mu02=uz006
stand s A ia
This Australian Standard was prepared by Committee MT-00I, Iron and Steel. It
was approved on behalf of the Council of Standards Australia on 30 April 2001 and
published on 5 Junc 2001
The following interests are represented on Committee MT-001
Australasian Railway Association
Australian Building Codes Board
Australian Foundry Institute
Australian Industry Group
Burcau of Stcel Manufacturers of Australi
Institute of Materials Engineering Australasia
Society of Automotive E
Australia
Add
Metal Building Products Manufacturers Association
Tube and pipeline manufacturers
eping Standards up-to-date
ds are living documents which reflect progress in science, technology and
systems. To maintain their currency, all Standards are periodically reviewed, and
ions are published. Between editions, amendments may be issued
0Oz工Ou
may also be withdrawn. It is important that readers assure themselves
they are using a current Standard, which should include any amendments which
may have been published since the Standard was purchased
Detailed information about Standards can be found by visiting the Standard
Australiawebsiteatwww.standards.com.auandlookinguptherelcvantStandard
Alternatively, the printed Catalogue provides information current at I January cach
year, and the monthly magazine
ne Australian Standard, has a full listing of
revisions and amendments published each month
LO2u2mu0We also welcome suggestions for improvement in our Standards, and especially
encourage readers to notify us immediately of any apparent inaccuracies or
ambiguitiesContactusviacmailatmail(@standards.com.au,orwritetotheChicf
Executive. Standards Australia Intern
Ltd, GPO Box 5420, Sydi
NSW2001
This Standard was issued in draft form for comment as DR 99504
AS13972001
Australian Standard
Steel sheet and strip-hot-dip zinc.
coated or aluminium/zinc-coated
a?50>2u20zTou=b2u2mu02=uz006
Originated as part of AS A20-1934
Previous edition AS 1397-1993
Fifth edition 2001
COPYRIGHT
O Standards Australia International
All rights are reserved. No part of this work may be reproduced or copied in any form or by any
means, electronic or mechanical, including photocopying, without the written pemission of the
publisher.
Published by Standards Australia International Ltd
GPO Box 5420, Sydney, NSW 2001, Australia
ISBN 0 73373913X