一种安装橡胶护舷的装置.pdf

种安装橡胶护舷的装置
赵艳芬,王大展2,乔军军2
(1.广州橡胶エ业制品研究所有限公司,广东广州510280;2.广州市海盾橡胶有限公司,广东广州511447)
摘要:为了适应水运事业的发展,满足营运需要,采取更换橡胶护舷实现码头的改造是一项有效的措施。但是型号不同的橡
胶护舷,其安装用的螺栓规格、数量与间距也不同,在施工中用什么方式安装新配置的橡胶护舷至关重要。本文介绍了一种以
“定位板”结构安装的鼓型橡胶护舷,此装置的特点是在施工中对在营码头不会造成伤害,又可以节省施工时间,已在深圳市中
石化大鹏湾油库码头西泊位更换橡胶护舷的施工中应用,效果很好,是一个成功范例,具有推广价值。
关键词:码头;橡胶护舷;定位板;紧固件
An Installation Device for Rubber Fender
ZHAO Yanfen", WANG Dazhan", QIAO Junjun
1. Guangzhou Institute of Rubber Industry Products Co. Ltd, Guangzhou Guangdong 510280, China
2. Guangzhou Sea Shield Rubber Co, Ltd, Guangzhou Guangdong 511447, China)
Abstract In order to adapt to the development of water transport industry and satisfy the requirements of working, through replacing the
rubber fenders to realize the reform of wharf is assumed to be an effective measure. However the models of rubber fenders were varie
therefore, the size, quantity and distance of the bolts for their installation were different as well. Thus, the way to install newly-equipped
rubber fenders was very crucial. A new way to install drum rubber fender"Positioning Plate Structure"was described. The characteristics
of this device were not only brought no harm to the working wharf, but also saved a lot of time in working. It has been applied in the replace
ment of West Berths rubber fenders in Shenzhen Sinopec Dapeng Bay wharf at oil terminals, and has achieved good effects. So as a successful
example, it is worth being promoted
Keywords: Wharf; Rubber fender; Position plate; Fastener
0引言
施(如图1)。由于市场形势的变化,根据自身业务増长的需
位于深圳市龙岗区的中石化大鹏湾油库码头拥有东西两个要,为提高莒运能力,增强其吞吐量,拟将两套旧的型橡胶
泊位,其中西泊位为140000NT级,共有两个靠船墩,在每个护舷拆除,更换为SC1250H1(一鼓一板)鼓型櫲胶护舷。该项
船墩上各安装一套m型10001H1x2500L橡胶护舷作为防撞设工程通过招标来实施。
2000
2000
250150
60
600
250
600
700
600
700
1500
图1m型1000H×2500L橡胶护舷
《标书》中提出一道难题
的2.3中又提出“现场拆除旧护舷和安装新护舷要求在7天内
招标文件的《技术规格书》中提出“采用预埋套筒、地角完成”。而在审阅“施工方案”后只批准4天的工期。
杆、地角板与螺栓作为鼓型橡胶护舷的紧固件”。在招标文件
图2是安装SC1250H鼓型橡胶护舷用的预埋和联接构件。
收稿日期:2013-05-29
作者简介:赵艳芬(1975-),女,学士,工程师,主要从事橡胶材料及制品的标准制订、检測和研发工作。E-mail:964281894@qq.com。
研究与开发
Automobile Parts 2013.7
094