书签 分享 收藏 举报 版权申诉 / 4

类型不同鞍式支座包角和宽度下卧式容器筒体应力分布.pdf

  • 上传人:shanan.168
  • 文档编号:37745681
  • 上传时间:2017-06-17
  • 格式:PDF
  • 页数:4
  • 大小:965KB
  • 配套讲稿:

    如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。

    特殊限制:

    部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。

    关 键  词:
    不同 支座 宽度 卧式 容器 应力 分布
    资源描述:
    兔兔ww. kululu,com
    第43卷增刊1
    石油化工设备
    Vol 43 Supplement
    2014年8月
    PETRO-CHEMICAL, EQUIPMENT
    Aug,2014
    文章编号:1000-7466(2014)增刊1-0008-04
    不同鞍式支座包角和宽度下卧式容器筒体应力分布
    李玉玲,問月辉2,郝建树,韩旭
    (1.海洋石油工程股份有限公司,天津300451;2.中海石油环保服务(天津)有限公司,天津300451)
    摘要:基于有限元软件 ANSYS,建立双鞍式支座卧式容器有限元模型,计算了不同鞍式支座包角
    和宽度条件下鞍式支座附近的筒体应カ,得出了不同鞍式支座包角和宽度下筒体应力分布的变化
    曲线和规律,结果可为双鞍式支座卧式容器支座的选择提供参考。
    关键词:卧式容器;鞍式支座;包角;宽度;应力分布
    中图分类号:TQ050.1
    文献标志码:B
    doi:10.3969/j.issn.1000-7466.2014.S1.003
    Stress Distribution under Different Saddle Angle and Width of Horizontal Vessel Cylinder
    LI Yu-ling, ZHOU Yue-hui, HAO Jian-shu, HAN Xu
    (1. Offshore Oil Engineering Co Ltd, Tianjin 300451, China
    2. COOEC (Tianjin ) Environmental Protection Service Co. Ltd, Tianjin 300451, China)
    Abstract: Based on the software ANSYS, the finite element model of horizontal vessel double
    saddles was built. The different conditions, the saddle angle and width of the cylinder near the
    saddle stress were calculated and obtained under different angle of the saddle, and the width of
    the cylinder change curve and the law of stress distribution, for double bearing horizontal vesse
    as reference for the selection of the saddle
    Key words: horizontal vessel; saddle; angle; width; stress distribution
    卧式容器由于储存量大、制造筒单且使用方便国民经济的各个部门都有着广泛的应用。只要场地
    等特点,在石油化学工业、能源工业、科研和军工等允许,卧式容器常用于储存易燃易爆的介质。
    WANG Yun-xia. Design and Application of Pressure
    al. Development and Application of Safety Management
    Vessel Inspection Information System based on Web
    ystem for Pressure Piping Enterprisesljl Petrochem
    zhou: Lanzhou University, 2012.
    200623(4):26-27、)
    陈雁,高俊峰,王文灿,等,压力容器及压力管道安全管[9]李刚,王茜.基于Web访问数据库的实现方案[J].计
    理系统的应用[J].石油化工设备,2011,40(5):84-87
    算机工程与应用,2000,22(2):12-115
    (CHEN Yan, GAO Jun-feng, WANG Wen-can, et al.
    II Gang, WANG Qian. Implementation Method of
    Adopting Safety Management System for Pressure
    Database Access based on Web[J]. Computer Engi
    Vessels and Piping .J. Petro-chemical Equipment,
    neering and Applications, 2000, 222): 112-115
    2011,40(5):84-87.)
    10]TS(GDO01-2009,压力管道安全技术监察规程[S
    [8]唐春容,赵立凡,徐国良,等.企业压力管道安全管理系
    (TSG Do001-2009, Technical Specification for Safety
    统的开发及应用[J.石油化工设计,2006,23(4):26-27
    Supervision Over Pressure Pipelineslsj.
    (TANG Chun-rong, ZHAO Li-fan, XU Guo-liang, et
    〔张编)
    收稿日期:2014-03-09
    作者简介:李玉玲(1987-),女,守夏吴忠人,工程师,学士,从事海洋石油平台机械设计工作。
    展开阅读全文
    提示  文档分享网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
    关于本文
    本文标题:不同鞍式支座包角和宽度下卧式容器筒体应力分布.pdf
    链接地址:https://www.wdfxw.net/doc37745681.htm
    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    版权所有:www.WDFXW.net 

    鲁ICP备09066343号-25 

    联系QQ: 200681278 或 335718200

    收起
    展开