JESD201A锡和锡合金表面涂层的锡须灵敏度环境验收要求.pdf

JDEC
SITANDARD
Environmental Acceptance
Requirements for Tin Whisker
Susceptibility of Tin and Tin Alloy
Surface Finishes
JESD20A
(Revision of JESD201, March 2006
SEPTEMBER 2008
JEDEC SOLID SITANETECIINOLOGY ASSOCIATON
JEDEC
NOTICE
JEDEC standards and publications contain material that has been prepared, reviewed, and
approved through the JEDEC Board of Directors level and subsequently reviewed and approved
by the J EDEC legal counsel
JEDEC standards and publications are designed to serve the public interest through eliminating
misunderstandings between manufacturers and purchasers, facilitating interchangeability and
improvement of products, and assisting the purchaser in selecting and obtaining with minimum
delay the proper product for use by those other than J EDEC members, whether the standard is to
be used either domestically or internationall
JEDEC standards and publications are adopted without regard to whether or not their adoption
may involve patents or articles, materials or processes. By such action JEDEC does not assume
any liability to any patent owner, nor does it assume any obligation whatever to parties adopting
the JEDEC standards or publications
The information included in JEDEC standards and publications represents a sound approach to
product specification and application, principally trom the solid state device manufacturer
viewpoint. Within the EDEC organization there are procedures whereby a JEDEC standard or
publication may be further processed and ultimately become an ANSI standard
No claims to be in conformance with this standard may be made unless all requirements stated in
the standard are met
Inquiries, comments, and suggestions relative to the content of this JEDEC standard or
publication should be addressed to JEDEC at the address below, or call(703)907-7559 or
www jedec. org
Published by
JEDEC Solid State Technology Association 2008
3103 North loth Street
Suite 240 South
Arlington. VA 22201-2107
This document may be downloaded free of charge. however JEDEC retains the
copyright on this material. By downloading this file the individual agrees not to
charge for or resell the resulting material
PRICE: Please refer to the currrent
Catalog of JEDEC Engineering Standards and Publications online at
http://www.jedec.org/catalog/catalog.cfm
Printed in the U. S.A
All rights reserved