EN 10152-2003 镀锌钢板标准.pdf

BRITISH STANDARD
BS EN
101522003
Electrolytically zinc
coated cold roled steel
aooooog0mooomo6-ooEo0-0g3=5:005
flat products for cold
forming-technical
delivery conditions
The European Standard EN 10152: 2003 has the slatus of a
British Standard
⊥CS77.140.50
古
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
British Standards
BS EN10152:2003
National foreword
This British Standard is the official English language version of
EN 10152: 2003. It supersedes BS EN 10152: 1994 which is withdrawn
The UK participation in its preparation was entrusted to Tcchnical Committce
ISE/10, Flat rolled steel products, which has the responsibility w
aid enquirers to understand the lext
present to the responsible international/European committee any
enquiries on the interpretation, or proposals for change, and keep the
UK interests informed:
oHOmo=ooo
monitor related international and Europcan developments and
promulgate them in the UK
A list of organizations represented on this committee can be obtained on
requcst Lo lls secretary
Cross-references
The British Standards which implement internalional or Euro
publice Lions referred to in this document may be found in the 1ST Catalog
under the section entitled"International Standards Correspondence Index, or
S
by using the"Search facility of the BSI Electronic Catalogue or of British
Standards Online
This publication does nol purport to include all the nccessary provisions of a
contract. Users are responsible for its correct applicatior
Compliance with a British Standard does not ofitself confer immunity
from legal obligations.
Co
CU This British Standard was
Summary of pages
H published under the authority This document comprises a front cover, an inside front, cover, the EN title page,
M of the Standards Policv and
o Strategy Commitlee on
pages 2 to 15 and a back cover
2May2003
The BST copyright date displayed in this document indicates when the
document was last issued
Amendments issued since publication
Amd. No
Comments
O C BST 18,uly 200
18July2003
Correction to clausc numbering in
Corrigendum No I
6,14.2
BN0580417816