festo_DNC_EN零件图.pdf

Standard cylinders DNC, to I$0 15552
one>s-mtoocnnn
1.2
Stroke up to 2,000 mm
Proximity sensors fit flush into
the sensor slot on 3 sides
Numerous variants for
customised applications
Specified types in accordance with
ATEX directive for potentially
explosive atmospheres
www.festo.com/en/ex
2007/03-subject to change-products 2007
1/1.2-21
Standard cylinders DNC, to IS0 15552
At a glai
DIN
The modern design and
An extensive range of accessorie
1S0 15552( corresponds to the
save up to 1 1% fitting space
makes it possible to install the
withdrawn standards S0 6431
compared to ordinary standard
cylinder virtually anywhere
DIN S06431 VDMA 24 562
cylinders, thus permitting a
The widest range of variants on the
NF E 49
compact system
vides the right DNC
cylinder for every application
Design features
Socket head screw with female
No protruding proximity
threads for mounting attachments
thanks to profile slots
Smooth, closed surface using slot
covers for the sensor slots (protects
Ind keeps dirt out
the profile slot
1.2
the end positions for absorbing
Broad ral
the residual energy from high
of accessories
speeds and machine cycles
Cylinder with clamping units
DNC.KP
DNCKE
Piston rod can be held or clamp
control systems in compliance with
The piston rod can be held in
EN954-1,EN1050,EN292and
position for long periods
Fail-safe
operating pressure or leaks in the
Piston rod can be clamped in any
POSIT
Cylinder with end-position lock
Cylinder/valve combination
DNC-.-EL
Mechanical lock when the end
The cylinder/valve combination is
position is reached
assembled and fitted with tubing
Lock is only automatically released
eady for connection
when pressure is supplied to the
Particularly suitable for decentra-
Cviinder
lised use in larger systems
End-position lock at one or both
en
m Cylinder
DNCT
Connection of 2 cylinders with th
same piston and stroke in series
uble the thrust and return force
in comparison to a standard
1/1.2-22
Products 2007-subject to change-2007/03