瓦楞纸板流水线生产管理系统.pdf

上海交通大学
倾士学位论文
瓦楞纸板流水线生产管埋系统
姓名:黄元刚
申请学位级別别:硕士
专业:软件工程
指导教师:傅宇卓;范晓烨
20070601
申请上海交通大学硕士学位论文
瓦楞纸板流水线生产管理系统
摘要
伴随着计算机技术的发展和普及,原有的生产管理技术已经远远
不能满足企业的生产发展的需要,现在的瓦楞纸板生产设备也必须利
用现代化的科技手段米控制和管理整个生产过程,以提高生产效率
由于纸板生产环境恶劣和生产设备的特殊要求,一般使用嵌入式
设备来代替普通的PC机。该生产管理系统就是采用 Formosa Industrial
Computing的MBM-530NS工控板和专用硬件板卡组成的工控机,安
装 Windows XP Embedded和由VB6开发的流水线生产管理系统。目
前该系统运行良好,解决了单片机系统中效率低,开发难度大和无图
形界面等问题,同时通过使用 Compact Flash来运行XPe,使得系统能
保证长时间在悉劣坏境下可靠运行。
在本文中我将分两部分来详细介绍整套软件中所使用的最新技术
和软件开发的知识。前一部分完整的描述了在该系统中采用的
Microsoft的最新嵌入式操作系统 Windows XP Embedded(XPe),XPe
操作系统的生成过程及其在目标机上的部署;后一部分则主要讲述了
瓦楞纸板流水线生产管理系统的总体规划,数据库的设计,软件开发
中的关键技术以及软件的调试和改进过程
在整套软件中,由于创新性的使用了XPe,改变了过去工业电脑
软件开发时选择操作系统的难度,体现了工业系统与桌面系统的真正
申请上海交通大学顷士学位论文
差別。同时,整套系统充分使用当前软件开发中的一些新技术,如使
用以太网来实现工业控制,使用数据库技术来实现企业管理。目前,
整套软件已经在多家企业使用,也充分证明该软件的市场价值。
关键词:嵌入式操作系统, Windows XP Embedded,生产管理系统,数据
库,横切电脑软件
申请上海交通大学硕士学位论
MANAGEMENT SYSTEM OF CORRUGATED
CARDBOARD PRODUCTION LINE
ABSTRACT
Along with the development of computer technology and po
)polarization, the
original production management technology has been far from satisfying the needs of
the production. In order to cut expenditure and reduce staff to improve efficiency, the
corrugated cardboard production equipment also means making use of modern
technology to control and manage the entire production process
Because of the bad production environment and special requirements of
production equipment, Embedded equipments are used to replace the ordinary PC in
industry environment generally. This production management system is based on the
Formosa Industrial Computing made up of MBM-53ONS IPC board and a dedicated
hardware Card. All IPCS install Windows XP Embedded and the software of
production management systems runs on Xpe. At present the system works well and it
solves some disadvantage of the SCM(Single Chip Micyoco) system: inefficient
difficult to develop, without a graphical interface, etc. Xpe is in the Compact Flash so
it can enable the system to ensure reliable operation under harsh environment in a long
tie
In this paper I will be divided into two parts which are used to introduct the latest
echnology and software development. The first part describes the latest Windows XP
Embedded(Xpe), the generation process of Xpe operating system and the deployment
on target machine; The second part introduces the overall planning of the corrugated
cardboard production management systems, database design, software development of
key technologies and software debugging and improving the process
This system uses many new software technologies, Such as using Windows XP
Embedded, using Ethernet in industry control field. Now this software system has
been applied by many enterprises
KEY WORDS: Embedded Operation System, Windows XP Embedded
Production Manage System. Database