NFPA 8506-1995 热回收蒸汽发生器.pdf

NFPA 8506
Standard on
Heat Recovery
Steam
Generator
Systems
998 Edition
National Fire Protection Association, 1 Batterymarch Park, PO Box 9101, Quincy, MA 02269-9101
An International Codes and Standards Organization
TheStandardisdownloadedfromwww.bzixw.comStandardSharing
National Fire Protection Association Inc
One Batterymarch Park
Quincy, Massachusetts 02269
TMIPORTANT NOTICE ABOUT THIS DOCUMENT
NFPA codes and standards, of which the documcnt contained herein is one, are developed through a consensus stan-
dards development process approved by the American National Standards Institute. This process brings together volunteers
representing varied viewpoints and interests to achieve consensus on fire and other safety issues. While the NFPA admin-
isters the process and establishes rules to promote fairness in the development of consensus, it does not independently test
evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its codes and standards
The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether
special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance n
this document. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information pub
lished herein
In issuing and making this document available, the NFPA is not undertaking to render professional or other services
for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to
advice ofa competent professional in determining the exereise of reasonable care in any given circumsta te, seek the
someone else. Anyone using this document should rely on his or her own independent judgment or, as appr
The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of this document
Nor does the NFPA list, certify, test or inspect products, designs, or installations for compliance with this document Any
certification or other statement of compliance with the requirements of this document shall not be attributable to the NFPA
and is solely the responsibility of the certifier or maker of the statement
NOTICES
All questions or other communications relating to this document and all requests for information on NFPA procedures
overning its codes and standards development process, including information on the procedures for requesting Form
Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during
regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Coun
cil, National Fire Protection Association, I Batterymarch Park, P O. Box 9101, Quincy, MA 02269-9101
Users of this document should be aware that this document may be amended from time to time through the issuance of
Tentative Interim Amendments, and that an official NFPA document at any point in timc consists of thc current edition of
the document together with any Tentative Interim Amendments then in effect. In order to determine whether this document
is the current edition and whether it has been amended through the issuance of Tentative Interim