宝钢汽车板冷轧钢板手册.pdf

Cold Rolled
utomotive
Steel Sheets
PRODUCT CATALOGUE
汽车用冷轧钢板产品手册
宝山钢铁股份有限公司
BAOSHAN RON& STEEL CO. LTD
宝钢新日铁汽车板有限公司
BAOSTEEL-NSC/ARCELOR
C NT
汽车用冷车钢板产品手册
第一章公司简介
第二章产线简介
第三章使用指南
Aboul Us
Production Linc Introduction
Instruction Manual
te OI
Page 06
Page 08
宝日汽车板公司由宝山钢鉄股份有限公司、宝钢有三个现代化的冷轧厂生产汽车板
冷轧板
Cold rolled plates
新日本制铁株式会社、阿赛洛三方合资组建包括一冷轧(2030冷轧厂)、三冷轧(1550冷
电镶锌
10
而成。总投资65亿元,注册资本金为人民币
)以及与新日铁、阿赛洛合资的1800)冷 Electrogalvanizing
30亿元。主要生产装备及核心技术,集中体轧。
热餿锌
现出当代世界钢铁制造业的一流水准。公司
Hol dlp galvanizing
从2002年9月开始建设,预计2005年3月第
In Baosteel. there are three modern cold rollin
条机组将正式投产。
mill plants producing automotive sheets
lo. 1 cold rolling mill plant(2030mm, No.3
BNA is
cold rolling mill plant(1550mm)and 1800mm
contributed by Baoshan Iron Steel Co
cold rolling mill plant built jointly With NSC
Ltd, Nippon Steel Corporation and Arcelor
and Arcelor
Its total investment counts RMB 6.5 billion
and registered capital totals RMB 3 bilion
reflect the global state-of-the-art of iron
steel making industry in a centralized way.
Beginning construction from Septemb
2002. its first line is to come into stream in
March 2005 as per the plan
第四章产品介绍
第五章汽车板使用技术
第六章质量保证体系
Products Instruction
Jsc Tcchnology ol'aulomotive Sheels
Quality Assurance Systcm
Page 12
Page 56
Page 74
e平1G白PE4多110N
宝剝冷轧产品牌号命名方法
冲成形
Nommericlature for grades of cold ru ed products in Baosteel 12
Forming
1992年开始,我们从钢铁行业实际出发
汽车用普冷钢板(带)
焊接技术
63
按照IS09002标准的要求,建立和完善文
Common cold roled automotive lates (strids)
件化的质量体系,并于1994年通过了英国
低碱和超低钢钢仮及钢帯
14
凃涂装技术
BSI公司IS09002(1995年转为IS09001)认证,
o aron and umllr-ow arbo steel pates and strips 14
ealing Ichnology
1999年?2003年分别通过了BSI公司QS9000和
碳素结板及制带
裤化技术
ISO/TS16949:2002版标准认证
Carbon structura steel plates arid strips
Phosphatng Technology
加高强度钢板及钢带
High strangth phosphor sccl plalcs and strips
222
电泳涂装技术
Electrophoresis
余装外观质量控制技术
000223飞
improving its documentation quality syst
烘烤硬化高强度钢饭及钢带
I ligh strangth bakc hardening slecl plalcs and srips 27
Qualily con rolling ichnology o Coalngppcarance 73
according to ISO9002 standard requirements
双相高强度冷轧剝及钢带
28
of the actual situation of iron and
Cold roller ig -strength du -phase steel plates and stns ?9
steel industry. In 1994, it was awarded with
低合金高强度
IS09002 certification(converted to ISO9001
High-strerigth ow ally ste
33
in 1995)by Bsl, UK. In addition, it passed
汽车用电镀锌钢板(带
the QS9000 certification in 1999 and SO/
Electrogalvanized automotive plates (strips)
S16949: 2000 standard certification in
汽车用热镀锌钢板(带)
Hot dip galvanized automotive plates (strips)