API 5C2-1999套管、油管和钻杆使用性能通报.pdf

Bulletin on Performance Properties
of Casing Tubing and Drill Pipe
APL BULLETIN 5 C2
TWENTY-FRST EDITION OCTOBER 1999
American
Petroleum
linstitute
Helping Yo
Gett The Job
Done Rig htsm
Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/03/20
00: 40: 31 MST Questions or comments about thi
age: please call the Document
licy Group at 303-397-2295
m Institute
Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/03/20
ense with Apl
0040: 31 MST Questions or comments about thi
age: please call the Document
licy Group at 303-397-2295
Bulletin on Performance Properties
of Casing, Tubing, and Drill Pipe
Upstream Segment
AP BULLETIN 5C2
TWENTY-FIRST EDITION. OCTOBER 1999
American
Petroleum
Institute
Helping Yo
Gett The Job
Done Rig htsm
Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/03/20
0040: 31 MST Questions or comments about thi
age: please call the Document
licy Group at 303-397-2295
SPECIAL NOTES
API publications necessarily address problems of a general nature. With respect to
ular circumstances. local, state, and federal laws and regu]ations should be reviewed arti
API is not undertaking to meet the duties of employers, manufacturers, or suppliers to
warn and properly train and equip their employees, and others exposed, concerning health
and safety risks and precautions, nor undertaking their obligations under local, state, or fed-
Information concerning safety and health risks and proper precautions with respect to par-
ticular materials and conditions should be obtained from the employer. the manufacturer o
supplier of that material, or the
ial safety data sh
Nothing contained
to be construed
anting any rig
implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or prod
Neither should anything ce
in the publication be
strued as insuring anyone against liability for infringement of letters patent
Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every
five years. Sometimes a one-time extension of up to two years will be added to this revie
cycle. This publication will no longer be in effect five years after its publication date as an
operative A PI standard or, where an extension has been granted, upon republication. Status
of the publication can be ascertained from the API Upstream Segment [telephone(202)682
This document was produced under API standardization procedures that ensure appropri
ate notification and participation in the developmental process and is designated as an AP
standard. Questions concerning the interpretation of the content of this standard or com
ments and questions concerning the procedures under which this standard was developed
should be directed in writing to the general manager of the Upstream Segment, American
Petroleum Institute, 1220 L Street, N W, Washington, D. C 20005. Requests for permission
to reproduce or translate all or any part of the material published herein should also be
addressed to the general manager.
Apl standards are published to facilitate the broad availability of proven, sound engineer
ing and operating practices. These standards are not intended to obviate