PLC恒压供水上位机控制系统的研究.pdf
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- PLC 供水 上位 控制系统 研究
- 资源描述:
-
仪器仪表用
口经验交流□
doi:10.3969/ J. Issn.1671-1041.2012.01.020
PLC恒压供水上位机控制系统的研究
王
(辽宁装备制造职业技术学院,沈阳110161)
摘要:本系统采用VB6.0开发软件,实现西门子S7-200系列PLC与上位机之间的串行通信提高LC控制系统的实时监控性,
完控制系统的控制功能。通过VD6.0提供的串行通信 Activex控件 Mscomm,采用自由口通信协议实现PIC与上位机之间的
通信,使上位机能够获取相关实验数据进行存储和处理。本系统设计应用于恒压供水系统,对水泵的运行情况进行监控。
关键词:PLC;上位机;恒压供水
中图分类号:TP311
文献标志码:B
Research of constant pressure water supply host computer control
system based on PLC
WANG Xu
Liaoning Equipment Manufacturing College, Shenyang 110161, China)
Abstract This system realizes serial communication between Simens S7-200 series PLC based on 6.0 and the supe
rior machin, which is for he puose of hacing the PL conrol system s eal-time monitoring, perfecting laborator
bench controlsystem s control function seal communiation Active which provides through VB 6.0 controls Mscomm
it uses the free communication protocl to realize correspondence between PLC and thesuperior machine, enables the
super or machine to gain the elated mical atum to carry on the memory and processing promptly. This design is ap.
plied in the constant pressure water supply system, carries on the monitoring to water pumps movement situation
Key words: PLC; host computer; constant pessure water supply
0引言
高,传统的水塔、水箱及气压供水设备,由于水压不足,已经远
随着城市的发展,对住宅小区的供水质量要求的不断提远不能满足人们的生活需要。由于用户用水在高峰和低峰用
信息,包括特征距离探头环的位置,特征信号幅度,横截面积
guided wave for nondestructive testing. Review of Progress in Quanti
损失等,备注中标出在役管道状况,是否存在腐蚀等,为管道
tative Nondestructive Evaluation.2000.1.709-7716
维修提供依据。
2] Peter Cawley. Practical long range guided wave inspection-appli-
carious to pipes and rail. NDE2002 predict. assure. improve. Na
5结论与建议
tional Seminar OFLSNT Chennai12. 2002
M. Lowe, P. Cawley. The reflection of guide
本文以重庆气矿某站来气管道为例,运用超声导波技术
waves from circumferential notches in pipes, Joumal of Applied
进行檢测,对管道可能存在的疑似缺陷和腐蚀程度作出了初
Mechanics, 1998
步的判断,对管道的维修保养工作起到一定指导作用。
[4]赵彩萍.管道超声导波检测数据分析及缺陷诊断系统开发
超声导波技术在管道检测中有很多优势,仍有需要改进
[D].北京工业大学,2009
的地方:
5]张伯莹.压力管道低频导波检测技术应用性研究[D].大连
1)对于埋地管道来说,由于工作环境复杂,含有很多不确
理工大学,2009
定因素,使导波检测对疑似缺陷和腐蚀程度的判断很困难,需[6]李国华吴森,现代无损检测与评价[M].化学工业出版
要作进一步深入研究。
社,201
2)在现有统计分析和谱分析等方法基础上,采用小波变
[7]正智.超声导波技术及其在管道无损检测中的应用研究
换技术、二次型时频分布等技术对损失信号处理,可在一定程
[D].北京工业大学,2002.
度上提高信噪比,增强信号识别。
8]崔鹏,解腾云,王小保.长距离超声导波检测应用研究[J]
3)开发基于数据库的管道超声导波检测缺陷智能识别系
油气田开发,2011,40(3):299~301
统,妥善保存和有效利用导波检测积累的大量检测数据。口
作者简介;杨帆(1987年-),硕土研究生,测试计量技术及仪器专业,主
要进行超声导波技术在油气管道无损检测中的应用和超声导波信号
参考文献
分析处理方面的研究。
1 J Hyeon Jae Shin. Time-localization frequency analysis of ultrasonic
收稿日期:2011-09-16
欢迎订阅欢迎撰稿欢迎发布产品广告信息
EIC Vc?.192012No.157
展开阅读全文
文档分享网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



链接地址:https://www.wdfxw.net/doc17177612.htm